• Wide range to suit all applications, 220 PIW to 1,450 PIW (PVC, SOR-SC-FR rubber, steel web).

• White FDA PVC and FRASOR rubber.

• Technical support from our experienced team of engineers.

• Belts supplied slit, cut to length and punched to your requirements or in full coils.

• Full line of accessories: belt splices, elevator buckets, and bolts.

• Largest variety of mechanical splices.

• Used on PVC, rubber, and steel web belting.

• Light to heavy-duty applications.

• For belts rated from 220 PIW up to 1,450 PIW.

• Non-sparking in bronze and aluminum.

• Corrosion resistant in stainless steel 304 and 316.

• Contact 4B regarding your specific application.


• High strength drop forged links.

• Resilient nylon paddles can bend past obstructions.

• Eliminate bent steel paddles and hot work permits.

• Quick and easy bolt-on construction, every link is a convenient disassembly point.

• Paddles can be changed out while chain is in tension.

• Lightweight construction reduces power requirement.

• Quickest break-down recovery.


• Elevator bolt manufacturer with worldwide distribution.

• Five style available: Fanged, Norway, Easifit, DIN 15237 (Euro), and Ref 70.

• Available in carbon steel, zinc plated, and stainless steel.

• Domed washers, neoprene and leather washers, poly spacers, locknuts and whiz nuts also available.


• Ultra heavy-duty CC style elevator bucket.

• Designed for the most severe material handling applications.

• Thickest front lip, walls and corners for durability and long life.

• Larger sizes for maximum capacity output (up to 24x8).

• Made from high density polyethylene, nylon, or urethane.

• Unique molded low profile.

• Made in the USA.


• High efficiency CC style elevator bucket available in 35 sizes.

• More bushels per inch of belt than any other CC elevator bucket.

• Reinforced wear lip (Iceberg Edge).

• Buckets nest to save on shipping and storage costs.

• Made from high density polyethylene, nylon, or urethane.

• Ideal for low profile applications.

• Made in the USA.


• RF capacitance point level indicator with automatic material build-up compensator.

• Push button calibration, digital display, and internal timer features.

• Stainless steel probes.

• Flush mount and remote versions available.

• CSA Class II, Division 1 approved.


• Capacitance point level sensor detects level or plug situations for bulk granular solids or

liquids.

• LED status lights, fully potted electronics, relay contact output.

• Magnetic calibration and adjustable sensitivity control.

• CSA Class II, Division 1 approved.


• Failsafe rotation detection with adjustable torque control.

• Direct stepper motor drive, no clutch and no gearbox.

• Shaking action for shedding material build up.

• Vertical extensions up to 14 feet are available.

• Other rotary level indicator versions available.


• Class II, Div 1 Groups E, F, and G approved in US and Canada.

• RJ-45 socket supports EtherNet/IP, PROFINET, and Modbus TCP/IP.

• Sample software available for AB and Siemens PLC’s.

• Up to 16 total sensor inputs: temperature, speed, 4-20mA, digital.

• Fast sensor network scanning.


• Inductive sensor for monitoring shaft underspeed conditions.

• Universal voltage (24 - 240 VAC/VDC).

• Magnetic calibration with dual set-points: 10% and 20%.

• Totally sealed construction: submersible.

• Can be installed with Whirligig® target/bracket/guard.

• CSA Class II, Division 1 approved.

• IP67 protection.


• Fully guarded target/bracket/guard for easy mounting of motion sensors.

• Suitable for all industry standard cylindrical or DIN style inductive sensors.

• Available with 1, 2, 4, or 8 targets.

• Requires 1/2 inch UNC tapped hole in the machines shaft for installation.

• Optional MagCon™ magnetic connector available (150 lbs. pulling force).


• Detects belt tracking and misalignment problems on bucket elevators and conveyors.

• Sensor detects the lateral force of the belt or pulley and activates a voltage free relay contact to alarm or shutdown the machine.

• Electro-mechanical limit switch with no moving parts.

• External test functionality and LED indication.

• CSA Class II, Division 1 approved.