• Complete line of centrifugal and axial fans
to meet your aeration needs.
• Highest airflow has made Sukup #1
in centrifugal fans.
• Fan wheels are dynamically balanced
for smooth, trouble-free operation.
• Sukup has more than 40 years of
experience in manufacturing fans.
• Up to 165 ft. diameter bins.
• Capacities from 3,000 to 12,000 bph.
• Operates in automatic or manual mode, using a PLC.
• Heavy-duty welded frame.
• Zero-entry touch screen controls.
• Controls include moter VFDs and safety interlocks.
• Capacity to 60,000 bph
(48-inch pulley).
• Low-impact head design allows grain to slide gently along the contour of the head, instead of bouncing off of it.
• Split-head construction for easy interior accessibility.
• Galvanized construction.
• Heavy-gauge, huck-bolted legs.
• Exclusive squaring plates with patented alignment pins ease
construction.
• Welded tubular side construction with
bolt-in bottom.
• Hot-dipped galvanized finish.
• Patent pending wind plates provide a
solid connection and offer more
resistance to torsion than current
connection methods offered by
competitors.
• Knock-down design for economical shipping.
• Capacities up to 60,000 bph.
• Heavy-gauge, galvanized steel
construction.
• Patented dust-proof and weather-tight covers.
• HD engineered chain with ½ in.
UHMW flights.
• Shaft, sprocket, and bearings can
be easily removed as one piece.
• Split sprocket with hardened teeth.
• Capacities up to 12,000 bph.
• Grain exchangers turn grain for more equalized drying.
• QuadraTouch ProTM controls make Sukup Tower Dryers easy to operate and the control box can easily be located remotely.
• Stainless steel outer screens, nuts and bolts resist rust.
• Extra-large wet holding bin features solid
sheeting to keep grain dust and particulate
matter confined within the dryer.
• Optional particulate shroud (pictured).
• Up to 2.25 million bushel maximum
capacity – 165 ft. diameter.
• Up to 150,000 lb. peak load ratings.
• Double-ended stud bolts eliminate water infiltration between laminated sheets and grain at stiffener location - Patent No. 10,407,935.
• Full line of accessories and material handling equipment
also available to complete your system.
• Knot-passing pulley, restrain anchor and
safety line retrieval line are standard.
• Hot-dipped galvanized finish.
• Heavy-duty ASTM A325 hardware.
• Computer engineered, strength-staged for wind, seismic, cleaner, catwalk, and other loads.
• Inverted V-Bracing on 14 ft. x 14 ft. and larger.
• Modules available in 20 ft., 10 ft., and 5 ft.
sections. (Pictured: 20 ft. x 20 ft. x 195 ft.)
• Knock-down design for economical shipping.
• Optional wrap around or switch back stairs and interior or exterior platforms are available.