- Galvanized bolted construction with hot-dip galvanized weldments.
- Pre-assembled with handrails only knocked down to reduce field labor.
- Bottom box truss design with 24 in. wide gripstrut walkways and handrails.
- 46 in. x 24 in. model for 40 ft. clear spans and 72 in. x 30 in. model for 60 ft. clear spans.
- 4-leg support towers for each catwalk model.
- Original brush seal design with no up or down movement on inside swing-spout.
- 8 Models 6” through 20” in 45º or 60º flow, flat back and full round, up to 18 outlets.
- Hot-dip galvanized with no-tools service door & optional service door platform.
- Positive locking stainless steel index plate located under distributor for protection from dust & weather issues on manual control models.
- Expanded throat on internal swing-spout, optional urethane liners for extended life on all wear surfaces.
- Swing-spout assembly rotates on (4) guide bearings at the top and a flange ball bearing at the bottom for a smooth and easy movement.
- Electronic position control optional in place of pipe or cable controls.
- Straight line.
- Capacities up to 26,000 bph.
- All galvanized construction with bolt-on bottom and covers.
- UHMW Flights bolted to chain attachments.
- Bolted assembly for easy installation and service.
- 45° incline models for pit hopper applications.
- Class II gears mounted at factory.
- Chains and paddles installed in straight line drags.
- Capacities up to 32,000 bph in galvanized or stainless steel construction.
- Slide lagged head pulleys with no-tool access covers for replacing lagging.
- Head and boot hot-dipped galvanized after welding.
- Hinged head covers for improved safety of the service personal.
- Galvanized legging-twin box; jig welded for correct alignment.
- Hinged inspection door for easy access to belt and buckets.
- Class ii gear reducers, drives and guards factory installed.
- Personal fall arrest system by Honeywell / Miller on service ladders.